pro4.0的安装方法

gql · 发表于 2009-8-17 12:03

pro4.0的安装后无法使用，打不开
有那位大哥大姐指教一下

mfy1969mx · 发表于 2009-8-17 14:35

运行破解文件了吗？
1. Open "license.dat" in any text editor and change all strings "YOUR_HOST_ID" for your computer real Host_ID (your Network Card MAC-adress) and save

2. If your want to run  ProE Wildfire 4.0 F000 (and higher) go to 5.

3. If your want to use this "license.dat" for ProE Wildfire 4.0 C000 (PreProduction) change all strings "ptc_d 29.0" in "license.dat" for "ptc_d 28.0", save and go to 5.

4. If your want to use this "license.dat" for ProE Wildfire 3.0 (any build) change all strings "ptc_d 29.0" in "license.dat" for "ptc_d 27.0", save and go to 5.

5. Install ProE WF4 F000 or  ProE WF4 C000 (PreProduction) or ProE WF3 (any build)) and/or  ProE Mechanica (any build) using "license.dat" as "Nodelocked License File. (No Server running)"

6. Run ProE_WF3_Mxxx_WF4_crk.exe（本破解文件也适用于M040/060/080版）

7. Wait for system messages
"Pro/ENGINEER 3: successsfully patched!"
"Pro/Mechanica 3: successsfully patched!"

8. Click OK
That's all..

P.S. If you did not install Pro/Mechanica  you will get a message
"Pro/Mechanica 3: product not installed or files not found!"
Click OK