【用5.0 M060的各位进来帮忙下】

zhwhgdyxy82

我的能装上啊

zhwhgdyxy82

有的在lic-gen里

springbao

破解文件在这里。（件附图）

springbao

http://www.proewildfire.cn/thread-51427-1-1.html
具体的可以看看这样。

野火

看楼上贴的教程就可以

jenarlion

Installation Crack Method for PTC Pro/ENGINEER Wildfire
=========================Directory path can not be Chinese==================================
When Steps To Designated license server, Select the Locked license file (Server is not running)
1> Open license.dat then replace all string"00-00-00-00-00-00" with your PTC_HOST_ID(MAC address jusr Your netcard physical address) then save.
2> Install your pro/E &pro/M wildfire with above modified license file.Node Locked license method and No license server installaion needed.
2.Run patchs!
Aut proe-patch.exe under directory :
<Installed location>\proeWildfire 4.0\i486_nt\obj       then apply it.
But prom-patch1.exe under directory :
<Installed location>\proeWildfire 4.0\mech\i486_nt\bin      then apply it.
Cut prom-patch2.exe under directory :
<Installed location>\proeWildfire 4.0\mech\i486_nt\ptc      then apply it.
3.If you want install PTC Distributed Services,access PTC.Setup: other product->TC Distributed Services, use the modified license.dat at step one with node locked lic method. Then Put prods-patch.exe under directory :
<Installed location>\ptc_distributed_services\     then apply it.

dependents

给你发过去了 你看看吧