请群主大人帮忙翻译一下安装说明，谢谢

天驱行 · 发表于 2015-10-16 21:56

我下了个PTC_Creo_2.0_M080安装软件，里面安装说明请群主大人帮忙翻一下

1. Open "ptc_licfile.dat" in text editor and replace 00-00-00-00-00-00 in every-feature with your real ptc_hostid (real ptc-hostid of your computer is shown in left bottom coner of PTC installer window)

2. Install PTC Creo 2.0 Mxxx. Wnen asked for license select "Nodelocked license file (No server running) and browse to "ptc_licfile.dat"

3. Install PTC Creo 2.0 Mxxx Distributed Services Manager (optional)

4. Run "PTC_Creo_Patcher_SSQ.exe" (on Vista/Win7 computers be sure to run it as Administrator).

Click "Look For..", browse to <Creo 2.0 progdir>\Common Files\Mxxx\ (by default C:\Program Files\PTC\Creo 2.0\Common Files\Mxxx\) and click "Look For.." once again

Click "Start" and wait for patcher info window "All files seem to be patched. Enjoy!"

Click "OK"

5. If you have installed PTC Creo 2.0 Mxxx Distributed Services Manager

Click "Look For..", browse to <Creo 2.0 Mxxx Distributed Services Manager progdir> (by default C:\Program Files\PTC\Creo 2.0\Distributed Services Manager\) and click "Look For.." once again

Click "Start" and wait for patcher info window "All files seem to be patched. Enjoy!"

Click "OK"

6. Close "PTC_Creo_Patcher_SSQ"

7. Enjoy

Cracked by Team-SolidSQUAD